Tag: maleficent

Maleficent Photos by Alan Tijerina Photography

Breanna Cooke as Maleficent | Photo by Alan Tijerina
Photo by Alan Tijerina

More Maleficent! I had the good fortune of bumping into Alan Tijerina Photography while I was at Dallas Fan Days in February. He captured some great photos of my Maleficent costume on the patio at the Irving Convention Center. And in case you missed it, take a look at my blog posts about how I made my Maleficent collar and horns so you can be Maleficent too!

Breanna Cooke as Maleficent | Photo by Alan Tijerina
Photo by Alan Tijerina
Breanna Cooke as Maleficent | Photo by Alan Tijerina
Photo by Alan Tijerina Photography
Breanna Cooke as Maleficent | Photo by Alan Tijerina
Photo by Alan Tijerina
Breanna Cooke as Maleficent | photo by Alan Tijerina
Photo by Alan Tijerina

Making a Maleficent Collar and Cloak

Breanna Cooke Maleficent costume - Photo by Alan Tijerina Photography
Photo by Alan Tijerina Photography

Last Friday I won the Saturday ticket giveaway from the Irving Convention Center for Dallas Comic Con Fan Days! I was so excited, but I didn’t have a new costume finished…and how could I go to Fan Days without dressing up?!  I already had Maleficent horns from a previous project, so I took on the challenge of making a Maleficent collar and cloak in one night. Below are some of my behind-the-scenes photos of my late night crafting.

Collar

Breanna Cooke Maleficent costume collar DIY I got some great ideas from this DIY Maleficent tutorial by Pins and Things. She used cardboard and wire to hold the collar upright. I opted for craft foam, hot glue and wire as the core for my collar. I sandwiched the wire between a layer of craft foam. Then I sewed fabric sleeves for each section, pulled it over the craft foam, and sewed up the open end.

Attaching the Collar

Breanna Cooke Maleficent costume collar DIYThe robe for my costume wasn’t going to support the weight of the collar, so I made a base from EVA foam (you can use those interlocking anti-fatigue floor mats, visit my Resources page for where to buy it). Now the whole collar would be a solid, removable piece from the robe. I shaped the EVA foam with a heat gun and made a fabric sleeve for it in the same way I made the collar sleeves. I hot glued and sewed the individual collar pieces to this foam/fabric base, then loosely stitched it to the robe.

Enhancing the Collar

Breanna Cooke Maleficent costume collar DIYIn the recent Maleficent movie, she has a cloak with the iconic pointy collar and a cloak with a feather collar. I took the best of both and added the feathers to mine. I used a section of black hackle feather trim (check Michael’s or Hobby Lobby) and glued it to the collar base with hot glue.

Cloak

Breanna Cooke Maleficent costume cloak DIYI never thought I’d find a use for my graduation gown, but tada! It provided a great base for the Maleficent robe. I purchased 4 yards of black polyester, cut a hole in the middle, and draped it over the robe like a poncho. I sewed the sides of the fabric “poncho” and left room for armholes, then cut open the front and stitched the fabric to the collar of the gown. If I’d had more time, I would have loved to make a really elegant cloak from scratch. Maybe next time!

Horns

Breanna Cooke Maleficent horns DIY with craft foam and electrical tapeAnd don’t forget the horns! Check out my other post with details about how I made my Maleficent horns. They’re made with reticulated foam, craft foam and electrical tape!  

Face

Breanna Cooke Maleficent makeupI used a variety of products to create the Maleficent face. I love the purple accents in the cartoon version of Maleficent, so my makeup was a mashup of both Maleficent looks.

  • Eyes: light and dark purple eye shadow (shown on my hand in the photo)
  • Eyebrows: Wolfe FX Hydrocolor cake in black
  • Face: Airbrushed with European Body Art Endura airbrush paint in white and black. Contours with grey eye shadow.
  • Lips: Vincent Longo lipstick in “Lust” (not shown)


How To Make Maleficent Horns

Maleficent hornsNeed Maleficent horns ASAP for Halloween? Here’s how I made a headpiece, inspired by the 2014 movie version of Maleficent. I made these pretty quickly so the process isn’t documented as well as I would have liked, but hopefully you’ll find some useful tidbits!

You will need:

  • Craft foam
  • Electrical tape
  • Reticulated foam (upholstery foam or styrofoam could work too)
  • Black faux snakeskin or pleather fabric
  • Tin foil and duct tape (for the helmet template)
  • Utility knife
  • X-acto knife
  • Scissors
  • Contact cement
  • Paper and sharpie (for the helmet and horn template)

1. Make a helmet with craft foam.

I learned out to make this helmet from Evil Ted Smith’s Youtube tutorial. Watch his video to learn how to make a helmet template that fits your head. Instead of using thick EVA foam, I used craft foam for a more flexible headpiece. I was a bit rushed so the seams aren’t as smooth and rounded as they could be.

2. Draw a horn template, trace it onto reticulated foam, and carve it out.

BreannaCooke_MaleficentHorns_0009_mergedDraw your horn shape onto your block of reticulated foam then carve it out with your utility knife. Make sure the blade is sharp. Compare your horns with each other to be sure you’re getting the right shape.

3. Cover the horns with electrical tape.

BreannaCooke_MaleficentHorns_tapeInstead of wrapping the tape around in a spiral, I cut each piece individually. Fold over the top edge of the tape to achieve the ridged effect.

4. Glue snakeskin fabric on the front of the headpiece.

BreannaCooke_MaleficentHorns_0001 copyUse contact cement to apply the fabric to the front and fold it under the front edge.

5. Glue horns on and cover the helmet with electrical tape.

BreannaCooke_MaleficentHorns_0008Glue the horns on with contact cement. To cover the rest of the helmet with tape, start at the base of the horns and weave your pieces of electrical tape around the helmet. I cut shorter pieces instead of trying to wrap long pieces all the way around. Continue to fold the top edge of the tape over to achieve ridges all the way down.

6. Go be fierce!

BCooke_DHB2014_0018