Tag: winged monkey

commander

Breanna Cooke Flying Monkey at Dallas Museum of Art Late Night

When the Dallas Museum of Art hosted a Wizard of Oz-themed Late Night event, I couldn’t resist making a Flying Monkey costume with my own twist! I already had the black feathered wings, so I just needed to make the outfit. Below are some behind-the-scenes photos of how I put it all together:

1. Hat

Flying Monkey Hat from Wizard of Oz by Breanna Cooke

The hat is made from a Laughing Cow Cheese container, craft foam, and cotton fabric. Unfortunately I didn’t document it well while I was working on it. The side of the hat is craft foam covered in fabric. I used spray glue (Super 77) to glue the fabric to the craft foam. I drew the zigzag design on paper, then traced it on the red, white, and black fabric, and made each one slightly larger than the last. The zigzag pieces of fabric were also glued with spray glue. I also added a chin strap with thin elastic, like the elastic on party hats.

Materials:

  • Laughing Cow Cheese container (empty)
  • Craft foam
  • Cotton Fabric: light blue, red, white, black
  • Spray Glue (Super 77)

2. Wig

Flying Monkey Wig from Wizard of Oz by Breanna Cooke

The wig started out as a weird Moses/Zeus wig from Party City. I didn’t have enough time to order anything online, so I used what I could buy locally. Armed with scissors, I slowly cut away at it to give it the signature widow’s peak of the monkeys (and most simians) in the 1939 edition of Wizard of Oz. I had my doubts at first but I’m really pleased with how it turned out.

Materials:

  • Grey wig
  • Scissors
  • Head form

3. Jacket

Flying Monkey Jacket from Wizard of Oz by Breanna Cooke

I created a paper pattern for the jacket based on reference photos and an existing fleece vest I own. Using plain cotton fabric in light blue, red, white, and black, I cut out all the layers to create the zigzag pattern and jacket base. I glued the zigzag layers together with spray glue (Super 77), attached it to the blue part of the jacket, and added interfacing to give the whole jacket the structured shape. I also added slits in the back of the jacket (not shown) for my wings to poke out.

Materials:

  • Cotton Fabric: Light blue, red, white, black – measure the amount you need based on your paper patterns and don’t forget about the hat!
  • Interfacing

4. Bodysuit

Flying Monkey from Wizard of Oz - Bodysuit - by Breanna Cooke

This costume, like my dragon costume, features a hand-dyed and painted bodysuit. I first tested the dye on a scrap of Lycra (1st image). I used Jacquard’s Dye-na-flow black, watered it down, added a few drops of Jacquard’s AirFix, and brushed the dye onto the bodysuit. Once it was dry, I painted on the fur with Jacquard’s Neopaque and Lumiere fabric paints.

Materials:

  • 1 white Bal Togs body suit
  • 1 bottle Jacquard Dye-na-flow black
  • 1 bottle Jacquard AirFix
  • Jacquard Fabric Paints: Black and White (Neopaque), Pewter and Pearlescent Blue (Lumiere)
  • Paint brushes

5. Feet

Flying Monkey from Wizard of Oz - Feet - by Breanna Cooke

I wanted to look like I was barefoot without actually being barefoot! Using some white socks (synthetic fabric), I stuffed them with polyfill, then dyed and painted them with fabric paints (same as used on bodysuit). I applied Zombie Skin (a creamy latex) to the toes to reinforce the toe area. I pulled the stuffing out of the socks, added some foam insoles, then cut out holes for each my toes. When I wear the costume, I paint my toes with same blue bodypaint I use for the face (see #7).

Materials:

  • White Socks (synthetic fabric, like liner socks)
  • Zombie Skin (latex)
  • Polyfill (or rags to stuff inside)
  • Fabric paints and dyes (see #4 Bodysuit)

6. Wings

Flying Monkey from Wizard of Oz - wings - by Breanna Cooke

I made these wings a few years ago for my Harpy costume but they worked well for my monkey costume too. The frame was commissioned from Danielle Hurley and she does amazing work! I used chicken wire as the frame for the wings and hot-glued it to black canvas. I hot-glued approximately 350 black turkey feathers for the wings and used down from a black feather boa for the top. Needless to say, these wings are a tad heavy but they are definitely sturdy!

Materials (for the wings, not the frame):

  • Black canvas fabric
  • Chicken wire
  • Gloves and wire cutters
  • Black turkey feathers
  • Black feather boa

7. Face

Flying Monkey from Wizard of Oz - face - by Breanna Cooke

I followed reference photos from the movie so I could capture the big smirk of the monkeys. Since I wasn’t using any prosthetics, I also needed to give the illusion of monkey features with makeup. I painted my nostrils black to make them look wider and added accent lines to widen my nose and mouth. I used professional water-based bodypaint to paint my face, hands, and toes and red lipstick on my lips.

Bodypaints (all water-activated cakes):

I’ve created an Amazon list with most of these products.

Need more guidance on how to choose body paint for your costume? Check out my post “How to choose body paint and makeup for DIY Halloween costumes.”

And there you have it!

Flying Monkey - Photo by Ken Pearson Photography
Photo by Ken Pearson Photography

I’ve also been known to hang around with a certain Wicked Witch of the West (Chelphie Cosplay) at various events. Have a look at photos of our dynamic Oz duo.